How to Run Ethernet Cable Through Exterior Wall- House Networking Solution

Do you need to know how to run ethernet cable through exterior wall? If you don’t know or need help, read this.

Connecting the ethernet wires, especially in the condos, seems very tough and confusing. Here, you share the wall with your neighbors, and so the cables need to go through the wall.

But don’t give your head too much aching. Today, we will show you some safe and secure ways to run your cable outside along the wall. And get your internet connection without additional hassle.

So, please read it now and get rid of your headache.

Ethernet Cable Definition

Before you connect the ethernet cable, know about the wire first. If you don’t know about this cable then, there may be chances of getting the lower speed cable. 

Well, an ethernet cable is like a general cable. But the difference is inside the cable. There you will find seven to eight wires, whereas it can be four or five on others.

You will need an ethernet cable to establish an internet network at home or office. With this cable, you can connect the LAN(Local Area Network) with your computer device or router, or modem.

There are different types of ethernet cables. You may find the cat5, cat6, or cat7 type. In earlier times, people used cat5 type, which was standard enough. But nowadays, cat7 e cable is trendy as it has the fastest speed.

How to Run Ethernet Cable Through Exterior Wall

It is quite easy to run cables inside your interior walls. Isn’t it? But the thing is how to run an ethernet cable outside along the wall? It seems sturdy enough for many people.

Don’t worry. Whether it is cat5 outdoor cable or cat6, the process is all the same. You can smoothly run the cable inside your house in only two simple steps.

Things You Need

These are the tools or equipment you may need. But these can vary user to user.

• Drill Machine 
• Drill bit
• Ethernet cable

Don’t stop here! Here are the steps for connecting outdoor ethernet cable.

Step 1: Make a Hole with Drill

If your house does not have any spare hole made for wiring, then the first step is to create a hole on the wall. It would be best if you had a drill machine to make the hole.

Before making the hole, you have to be sure enough of the space from where you will run the cable. Also, you need to be very careful if there is no water line or house wiring line.

Moreover, in some houses of North America, the exterior wall has a wooden board. Make a hole or line carefully, cut it, and take it out from the wall.

Step 2: Insert the Cable

Now, insert the cable through the hole. Keep entering from any one side of the hole until it reaches the other hand.

Oh listen, here you can use another trick also. After making the hole with a drill, don’t take out the drill machine immediately. Take out the drill bit. Then, attach one end of the cable with the drill machine and take out the drill machine.

In this way, you can have the cable run without any hardship of pulling and inserting.

You can now connect your cable to an ethernet wall port or directly to the devices for internet access.

Run Ethernet Cable Through Exterior Wall in Condos

If you live in the condos, then, there you won’t need to make any holes mostly. There as you have the same walls with your neighboring house, you can find the holes already made for running any external wire.

So, let’s see how you can run the cable here.

Step 1: Find the Right Place

At first, find the right place from where you need the cable connection. Check there will be a hole or space for running cables.

Step 2: Insert the Cable

Now, insert your cable through it. Keep entering carefully without twisting your wire, until the other end reaches out of the hole. Here, you can use a trick to insert smartly. 

Insert a stiff, tuff wire into the hole. Then attach the ethernet cable very tightly with it. Then pull it out from the.

Thus, you can run the cable, and your cable won’t get any tangle or twisting.

Tips for Running an Ethernet Cable Through Wall

Read these tips below. You may need these while running the cable.

• While running the ethernet cable, make sure there are not any HVAC lining in the cable path.
• If your house wall has thermal insulation, then there may be jack installed inside your house. So, connect the cable through the non-insulated wall or the jack box.
• If you worry about your exterior clapboard then, we suggest having it painted or sealed right after cabling. Drilling a small hole is not a big issue at all. If you hire a cable connector man, he will do the same thing.
• Try to seal the hole after completing the cable connection task. In the time of raining, there can be a chance of water draining with the cable.
• Though the best quality of ethernet is waterproof, you should make sure the cable remains UV protected.
• Using silicone or slack to block the hole can be very beneficial. Slacking paint is a mixture of dirt and coal dust that you can use in the hole area. And the best thing about it is you can remove it easily whenever you need to change the cable or for any other issue.

Conclusive Words

The task of how to run ethernet cable through the exterior wall is not tough at all. And after reading this content, you will also believe it.

So, carefully read the steps shown here and get your house access to LAN connection.

More To Read:

• How to Build a Shed Foundation with Deck Blocks?-2 Easy Ways for You
• How to Use Gesso for Texture? The secret to Perfect 3D Painting
• Choose the Ideal Floor for Your New Home from These 5 Hit Options
• Know About the Small Things That Get Forgotten when Building a House
• Here’s What You Need to Achieve the Perfect Farmhouse Build